How to repair antique wood furniture

How to paint wood furniture with an aged look? White rings, caused when water vapor penetrates into a finish, can be removed by wiping them gently with a. Where a clear finish is chipped but the underlying color is intact, fill the ding with a few drops of. Large Scratches and Worn.

You should carve replacement appliques from the same type of wood and apply them using hot glue.

That way it could be corrected. A pro in the case of an antique is cheap. Stripping Wooden Furniture First of all, wash an inconspicuous part of a piece with soapy water to see what comes off. This 2-part epoxy resin is kneaded together and then applied to the lightly sanded surface to be repaired. There is, however, a trick to using this product properly.

You can also use wood repair wax, but doing so requires special tools and a certain amount of skill. On the other han almost anyone can accomplish a repair with resin filler without any specialized tools. Here’s a close-up of the keyhole damage.

This same technique I’m about to show you will work with any large holes in the wood or veneer you need to fill. Leaving the cardboard in place, weight the repair area solidly for hours. Then wax and polish the surface. With a sharp craft knife or single-edge razor blade, carefully cut the blister open down the middle, along the grain of the wood.

Be careful not to cut into the base wood. Experienced Appraisers Give You an Accurate Appraisal from the Comfort of Home! Begin the restoration of your wood furniture with a thorough cleaning.

Apply a bit of a wood cleaner to fine-grade steel wool. Work with the grain, and rub the surface of the old wood furniture. As a novice, the finer the sandpaper you use, the longer it will take to make a mistake. C open coat aluminum oxide will do nicely.

To remove any stripper residue and set the wood up to accept a finish, 2open coat aluminum oxide is good. Stain new wood to match the unstained look of the original furniture as closely as possible. To layer the stain, start with a dark stain, add a lighter stain such as a light coat of antique white, apply another coat of dark stain, and then blend the piece with a blending pencil. Mix stain into wood -filler putty before using it to cover nail holes.

For a less conspicuous repair , mortise the plate into the wood.

Carefully trace the outline of the mending plate onto the wood with a scratch awl or a sharp nail. This is my favorite wood glue to use for repair and furniture building. As that dries, mix up your epoxy wood filler. I’m using Bondo Wood Filler for this project. Removing the side panel applique was simple (usually they’re secured by small finish nails).

You may need help to do this. Using your fingers, rub the scratch with used coffee grounds that are still damp. Press them into the scratch as well as.

The thing to remember, Karen says, is that the finish in a piece of wood either adds to its value or takes it away. How can owners of antique furniture preserve their finishes—and the value. White spots on wood furniture often come from either heat or water stains.

Simple home remedies can help remove or minimize those white marks to restore the look of your wood furniture. Heat, toothpaste, mayonnaise and steel wool are items you may have at home that can help remove the spots.