Repair home button

First, remove the display assembly and take out the logic board. How to remove home button? Then remove the Vibrator, Loudspeaker, and charging port flex cable.

Replaced it with our new customized charging port flex cable. And then install the Vibrator and Loudspeaker. Open the handles to close the jaws of the iSclack.

You’ve successfully fixed your iPad’s Home button , or you have a great option to get it repaired if necessary. Pad Home Button : Fixed! In this case, the only way to get it working again is to have the hardware repaired.

The problem is that sometimes the damage can occur after the warranty period has lapse making the repair very expensive. You can find locations, get contact information, and set reservations here: Apple - Find Locations. You can also reach out to Apple Support directly for additional information and to review your options. Clean your Home Button. Calibrate your Home Button.

Using either a razor blade or an iSesamo opening tool, work up the adhesive on the right side of the Home button cable.

The Home button cable and shield should now be free. If your device is still under warranty, you are in luck. Contact Apple Support for help.

Other Solutions: Try to replace your device Home Button. Plugin your device to charge and leave it overnight and then restart your device. Thankfully, Apple built in a failsafe, so you can keep using your. If the home button is damage you can use the AssistiveTouch feature. Essentially, your home button is now on your screen.

Do you need a repair for other issues like the Home button or liquid damage? This does not include accidental damage, which requires a fee. Troubleshooting Home Button Problems The issue could be dirt or sticky substance on or around the home button.

Try using some rubbing alcohol () and a tissue or cotton swab to wipe around the button. If this does not work, let a few drops of the alcohol land directly on the home button. Use your iSesamo opening tool or a flat end of a razor blade to peel off the cable attached to the shield.

Peel the cable off the shield and replace it with the new one making sure the alignment is correct. To try it out, open any stock app like Notes or Messages on your iOS device. Then, you need to press and hold the side button.

When the Power Off slider appears, you need to let go of the side button. REWA Technology 194views.

Unfortunately, this cable is incredibly fragile. To check it, you’ll have to remove the metal plate that’s behind your screen. If there’s damage to this cable, you’ll have to replace your entire backlight.