Repairing laminate countertops

Free Bids From Trusted Local Pros. See Pro Reviews Before You Hire. Looking To Remodel Your Kitchen? Get The Bathroom Of Your Dreams. Need A Remodeling Professional?

Find A Pro That Fits Your Budget.

Compare Quotes From Area Pros. Home Remodel In The Works? Small scratches, gouges and chips can be fixed with laminate repair paste or a color-matched repair pen , available at most hardware stores and home improvement centers. How to install laminate on counter tops? Choose the color that most closely matches your countertop color.

Laminate glue also comes in an aerosol can, which works well for getting under loose countertops but is hard to clean up if the area is oversprayed and not protected with paper and tape. Use it only as a last resort. For small areas of bubbling, reactivate the adhesive by heating the laminate.

Use a hair dryer or an iron on low heat, taking care not to scorch the surface. Weigh down the repair area with heavy books or cans (see illustrations). Once expose it absorbs moisture quickly and loses its ability to hold a laminate bond. To hide damage with drop-in cutting boar set template that comes with board over damaged section of countertop , then mark around its cutout area.

Use a jigsaw or router fitted with a straight bit to cut out the damaged section of counter. It’s easy to knock a pan against the countertop and make a dent or chip while you’re cooking. Luckily, there laminate countertop repair kits are available to hide chips. Squeeze a small amount of laminate filler or paste that matches your Formica counter onto the.

For some products, you may have to clean the countertop with a solvent, so be sure to follow all label directions for application and inhalation safety precautions. Lay marble tiles on top of your counter. Putty kits are for bigger chips. Planning To Remodel Your Basement? The putty will be in the same base color as your laminate countertop.

Apply the putty to the chip and smooth it down to create a level surface. Leave the putty to dry before using the countertop. If you have a stone effect countertop, the chip will still be noticeable, but only when the surface is closely inspected.

Spread contact cement on with the applicator or a disposable natural-bristle brush for a laminate countertop adhesive, covering all edges.

End caps and other laminate edges sometimes come loose and can get broken off if not reglue but as long as the particleboard backer is in good condition, the fix is simple. Use a router to cut a recess around the damaged or burned area of the laminate and then fill that with a thin cutting board or trivet. For smaller burn areas, cut out the damaged area and use a filler product, such as SeamFil or FormFill.

Apply a wipe-on laminate sealant product with a clean rag. Laminate sealant products are available home improvement centers. Wait the recommended drying time before using the counter. If they do, you can fill the seams or gouges with. Before applying the paste, clean the counter with an ammonia solution to remove any dirt, grime and grease.

Let the counters dry thoroughly and then spread the paste over the bad spot with a putty knife. Pick out a laminate filler that matches the color of your countertop. Visit your local hardware store to find a. Squirt out the filler along the entire length of the scratch. Uncap the filler and squeeze it out on top of the. Your local paint store can supply you with the best type of paint to use in this project.

Many recommend a water-based acrylic primer, paint and top coat.