Shimano grip shifter repair

Remove the small set screw, using a hex or Allen wrench, that holds the cable in place. The cable should now move freely. Loosen the cable barrel adjuster and pull the cable end out of the housing to remove any slack. MicroShift 3XSpeed Compatible For Shimano Bicycle Twist Grip Shift Gear Shifters.

The right shifter controls the rear derailleur and the left controls the front derailleur. Now with the chain on the smallest cog on the rear cassette, pedal the bike with one hand and pull the front derailleur so that the chain goes onto the largest chainring at the front, and.

I moved the grip shift and brake away from the grip about a millimeter or so, and it helped immensely. Best Seller in Bike Shifters. Find Shifter Grip s Now!

Once you open up the shifter cover you can engage it to see what the problem actually is. There is an easy fix to this as you spray some brake cleaner or lubricating liquid into the affected area and work the pull back and forth to get it loose. It can be removed altogether by sliding it all the way, and by depressing the plastic prongs that hold it captive. Reassemble Shifter Apply a tiny dab of grease to the grooves where the cable sits inside the shifter. Slide the new cable back into the shifter , loosely wrap it around once, and then slide it through the shifter body.

Now pull the cable tight and set it down into the shifter grooves the same way it came out.

Use a small cross tip (Phillips) screwdriver to remove the small screw holding the cable cover. They are around $from Amazon. If your rear derailleur is NOT a SRAM, you want either a SRAM MRX or a Shimano shifter.

If your derailleur is a SRAM you need a SRAM shifter (not MRX). Or you could change to a trigger shifter if you want to try that, such as a SRAM TRX (not for SRAM derailleurs). As you are aware, consistent maintenance is critical to the bike performance. Above all, the optimality of repair and maintenance parts holds the key to it.

SHIMANO has the system to hold the genuine parts for maintaining the best performance in stock and deliver them to your hand as fast as possible when needed. Too much tension will prevent the gears from changing. Check the derailer control cables for rust, fraying or damage to the cable housing.

Have a bicycle repair professional replace the cables for you if the damage is extensive. Shop for Shifters Parts at Performance Bicycle. We ask for your understanding as you may experience delivery delays. Even though you can get the 10sp grip shifter to work I feel it works better with sram derailleur.

I run a 10sp GX grip shift on a bike with 10sp cog and Shimano XT 11sp derailleur, it works but is quite sensitive to adjustment I think. SHIMANO components create a more efficient bicycle-to-rider interface that demands less of your energy. We do it through low-effort and precise shifting systems and through linear response braking systems that deliver superior power and modulation.

Welcome to the Shimano official corporate website.

View Shimano ’s manufacturing technologies, enthusiasm for design and craftsmanship, IR information, recruitment information, and social activities. The Shimano Altus SL-M3Shifter offers light shifting operation, wide compatibility options, and is suitable for internal cable routing.